My iPod Nano charges its battery when docked in my "The Bridge IIIP", but only when playing. If I put it in Standby, charging stops.
Please switch the iPod Nano ON if you want it to charge while docked.
The test tone level changes if I use the Volume Control when the EzSet/EQ test is running. This happens with the remote control as well as with the Volume Button on the BDS.
Please try to establish the desired test tone volume before starting the EzSet/Eq procedure. If the volume is too loud or too soft, change the volume while the test is running, then re-start the test after it has stopped.
I have sound from the speakers even when the "MUTE" symbol is visible in the display.
This may happen if you press "MUTE", then initiate the EzSet/EQ procedure. Please press "MUTE" on the remote control to delete the symbol. Do not mute the unit before performing the EzSet/EQ procedure.
If I change DVD audio format from Dolby Digital to Linear PCM while playing a DVD, the sound disappears for a few seconds, then comes back.
This is normal. The signal is muted when switching sound formats.
If I select USB in the home menu while my USB stick is playing mp3 files, sound stops.
Selecting USB while already playing files will stop playback until you select a new file. Do not select USB if you wish to continue playing the current file.
Sometimes, if I remove the USB stick while playing from it, the BDS freezes.
Never remove a USB stick while the BDS is playing files from it. If the system freezes, switch the BDS unit OFF and then ON with the switch on the back panel to reset.
When playing from my iPod, I go to the Song List, then press "Channel +" or "Channel -" on the remote control. I would expect that the player jumps 10 songs and starts playing again. Instead nothing happens, or a wrong number is played.
The Channel Buttons cannot be used in the iPod song lists.
I cannot select "Restore Defaults" when a signal source is playing.
Please stop any current playback before trying to restore the default settings.
I have no audio in my speakers when listening to an external source.
Please note that the AUX source supports a variety of input connections. By pressing the AUX button on the remote several times, the input toggles between the different audio inputs. Please press the remote control AUX button repeatedly, until the front display shows the correct input source. This should set the AUX input correctly, and you should have audio back in your speakers, to let you enjoy your Harman Kardon system.
My new Harman Kardon BDS system contained a Sub200, but my owner's manual shows a Sub210. Have I received the wrong product?
Harman Kardon BDS systems can contain an HKTS 200 subwoofer rather than the HKTS 210 subwoofer that is mentioned in the documentation and manual. Both subwoofers have the same performance. The difference in product type number is due to the fact that these subwoofers are built in two different factories. When used in a Harman Kardon BDS system, there is no performance difference.
I would like to add wireless loudspeakers to my BDS system. Can I use your WEM-1 wireless transmitter for this purpose?
Yes, this is possible. The speaker outputs of the BDS channels that you want to transmit wirelessly must be connected to the two speaker inputs of the WEM-1 transmitter. Furthermore, it is important to add one RCA Phono/Cinch cable between a free input jack on the BDS and one of the low-level inputs of the transmitter. This is done to establish a ground connection, avoiding hum.
I want to listen to stereo music through all five loudspeakers of my BDS system, but I cannot see if it is possible.
This function is not available on the BDS units. So-called five-channel stereo is a feature which is available in Harman Kardon AVR surround receivers, but it has not been included in the BDS platform.
I cannot get the Audio Return Channel to work with my BDS system.
It is important to use the correct HDMI connection on the BDS, marked with ARC. Also, the proper input must be selected with the AUX input selector button, which scrolls between the six AUX inputs. It always selects the AUX input that you used last, so once you have used the AUX ARC input, the BDS unit remembers it until you select another AUX input. Of course you have to have a TV which actually supports ARC.
I cannot enter radio stations as presets, and cannot scroll through them with the Channel Plus and Channel Minus Buttons.
In order to store radio stations, press and hold the OK Button after having found the desired station. Press and hold the OK Button 3 times for about 2 seconds duration per press to open the Preset Input message on the front panel. Then enter two digits between 01 and 30 to enter the station into that memory. This places the station where you want it, and after programming you can run through the programmed station with the Channel + and - Buttons.